Stainless Turnbuckle Description
Stainless Tensile Structure Toggle Turnbuckle uses the lead screw to expand and contract to adjust the tightness of the wire rope. The components can be bound during the transportation of components, and the tightness can be corrected during installation. Toggle Turnbuckle is composed of adjusting rods, nuts and toggle bolts with left and right-hand threads. The adjusting rods are composed of U-shaped toggle and T bolts. When the anti-loosening nut is used, it is necessary to use a special matching sleeve to unscrew the anti-theft and anti-loosening bolt. Its anti-theft effect is good, safe and reliable. After the anti-theft and anti-loosening device is disassembled, it does not need to be taken down, and the ring guide plate on it is used to slide along the pull rod and can be adjusted and operated by moving a distance, so it is convenient to use. Its structure is simple, easy to process, low cost and strong practicability. It is especially suitable for power lines, especially as a positioning device for high-voltage iron tower tie rods and wire rope tensile structure buildings.
The flower basket bolts are cast steel parts. In the design calculation, only the corresponding tie rod can be calculated, but the specification of the flower basket should be one level higher than the tie rod. Various specifications of ordinary or high strength turnbuckle bolts, turnbuckle fork bolts, Tensile Toggle Turnbuckle, open body turnbuckle, pipe turnbuckle, materials: Q235B, 45 steel, stainless steel. Turnbuckle have eye to eye turnbuckle, hook to hook turnbuckle, fork to fork turnbuckle. The flower basket bolt is mainly used to adjust the tightness of the steel wire rope, and is widely used. Therefore, the flower basket bolt specification table is naturally more commonly used data. To learn more about turnbuckle SS316 size, please refer to our product details, we will give you the most professional help.